MyCalcSolver

Home

How much paint do you need? Measuring a room properly

Running out of paint halfway along the last wall is annoying. Buying four tins too many is expensive. Getting it right takes five minutes with a tape measure and a bit of multiplication.

Step 1: measure the walls

Measure the length and width of the floor, and the height from floor to ceiling. Add the length and width together and double it to get the perimeter: the total distance round the room. Multiply by the height and you have the area of all four walls.

A room 4 m long and 3 m wide has a perimeter of 14 m. With walls 2.4 m high, that is 33.6 m² of wall.

Step 2: take off doors and windows

You will not paint glass or the door itself (unless you are), so subtract them. Measuring each one is most accurate, but standard allowances work well: about 1.9 m² for a door and 1.5 m² for an average window, or 21 and 15 sq ft. Large patio doors or bay windows are worth measuring properly.

Step 3: decide on coats

Two coats is the right answer for most jobs. One coat can work when you are refreshing a wall in the same colour with a good quality paint. Three coats, or a primer then two coats, is usual when going from a dark colour to a pale one, or when painting new plaster.

Step 4: check the coverage on the tin

Every tin states how far a litre or gallon spreads, typically 10 to 12 m² per litre for emulsion, or 350 to 400 sq ft per US gallon. Use the lower end of the range for textured, porous or patched walls, because they absorb more.

Step 5: do the sum

Paint needed = area × coats ÷ coverage. For the room above with one door and one window, that is (33.6 − 3.4) × 2 ÷ 10 = 6.0 litres. A 5 litre tin and a 1 litre tin will do it, with a little left for touching up scuffs later.

Ceilings, trim and other surfaces

  • Ceilings: length × width. Ceiling paint is usually flat white and is often sold separately.
  • Skirting and door frames: these use a different paint (gloss or satinwood). A 750 ml tin covers the trim in most rooms.
  • Feature walls: work them out on their own, because they will be a different colour.

Tips that save money

  • Buy all the paint for one colour at the same time. Batches can differ slightly.
  • A larger tin is usually cheaper per litre, so 5 L plus 2.5 L often beats three 2.5 L tins.
  • Keep a small jar of leftover paint labelled with the room and colour name. It makes future touch-ups painless.

Read next