Home
Paint calculator
Measure the floor of the room and the height of the walls. The calculator works out the wall area, takes off doors and windows, and tells you how much paint to buy.
Your result and every step of the working will show here.
How it works
Paint is sold by volume, but you use it by area. So the job is to find the area you are covering, multiply by the number of coats, and divide by how far a litre or gallon of your paint will spread.
The walls of a rectangular room are two pairs of rectangles, so their area is the distance round the room times the wall height. The calculator then removes a standard allowance for each door and window: about 1.9 m² (21 sq ft) per door and 1.5 m² (15 sq ft) per window.
Rough or porous surfaces such as new plaster, bare wood and textured walls drink paint, so on those it is worth knocking the coverage figure down by 20% or so.
The formula
- Wall area = 2 × (length + width) × height − doors × 1.9 m² − windows × 1.5 m²
- Ceiling area = length × width
- Paint needed = area × coats ÷ coverage per litre (or gallon)
Worked example
A 4.5 m by 3.6 m bedroom with 2.4 m walls has a perimeter of 16.2 m and a gross wall area of 38.9 m². Take off one door and one window (3.4 m²) and you have 35.5 m². Two coats at 10 m² per litre need 7.1 litres, so a 5 litre tin plus a 2.5 litre tin covers it with a little to spare for touch-ups.
Common questions
Do I really need two coats?
Almost always, unless you are refreshing a wall in the same colour with a good paint. Two thin coats look more even and last longer than one heavy coat.
Do I need primer?
Use a primer or mist coat on new plaster, bare wood, repairs and stains, or when going from a very dark colour to a light one. Primer has its own coverage rate, so treat it as a separate coat in the calculation.
How do I measure a room with a sloped ceiling?
Split the awkward walls into rectangles and triangles, work out each area, and add them up. For a triangle, area is half the base times the height.
Should I buy extra?
A little, yes. Colours can vary slightly between batches, so it is better to have a small amount left over from the same batch than to run out halfway along a wall.
You might also need
- Flooring and Tile CalculatorFloor area, waste allowance, boxes to order and the total cost for tiles, laminate or wood.
- Concrete CalculatorVolume of concrete for a slab or pad, in cubic metres or yards, and how many bags to buy.
- Home Affordability CalculatorHow much house your income supports under the common 28/36 lending rule, with a full monthly breakdown.